Node Component Replacement; Node Replacement - Lenovo ThinkSystem SD530 V3 User Manual

Figure 29. Installation of the PSU cage
After this task is completed
1. Install the chassis to the rack (see
2. Reinstall the nodes into the chassis (see
3. Reinstall each PSU slot with a PSU or PSU filler (see
Installation of a PSU
4. Proceed to complete the parts replacement (see

Node component replacement

Follow instructions in this section to remove or install the node components.

Node replacement

Follow instructions in this section to remove or install a SD530 V3 node from or to the D3 Chassis.
Remove a node from the chassis
Follow instructions in this section to remove a SD530 V3 node from the D3 Chassis.
About this task
To avoid potential danger, make sure to read and follow the safety information.
R006
ThinkSystem SD530 V3 User Guide
72
"Install the chassis to the rack" on page
"Install a node to the chassis" on page
filler).
"Install a hot-swap power supply" on page 61
"Complete the parts replacement" on page
54).
75).
171).
and