Lincoln Electric FlexCut 200 Service Manual page 18

LINCOLN ELECTRIC
Trigger locked.
The door to the Flexstart
console is open.
Coolant hoses not connected,
leaking or blocked.
Not enough coolant in cooler
reservoir.
Torch coolant has exceeded
temperature limit.
FlexCut® 200 Service Manual
Release the trigger before
continuing. The trigger must
be disabled at machine startup
or when changing modes.
Close the Flexstart door and
latch it tightly.
Check door switch if problem
persists.
Check coolant hoses and
replace if necessary.
Add more coolant to reservoir
of cooler. Check for leaks or
disconnected hoses.
Allow coolant to fully cool
before continuing. Verify that
the cooler fans are working
properly and radiator is not
blocked. Verifying cutting
current and voltage do not
exceed rating plate limits.
13