At Command Set And S-Registers; At Commands And S-Registers - Paradyne 3760 User Manual

AT Command Set and
S Registers

AT Commands and S-Registers

This chapter provides a list of all AT commands and S-Registers
supported by the KeepInTouch Card modem. This chapter first
lists AT commands in alphabetical order followed by S-Registers
listed in numerical order. Factory settings are listed in bold.
In general, AT commands are responsible for instructing the
modem to do a task, such as dialing, hanging-up, loading factory
default settings, etc. However, some AT commands, and most
S-Registers, are responsible for setting configuration options
which determine how the modem operates. You issue these
commands to your modem via your communications software.
When a modem receives a command, it responds with a
message, known as a response code, that displays on your
monitor. Response codes are described in Appendix C.
For a brief overview of command guidelines, refer to the Using
AT Commands section in Chapter 3, Using Your Modem .
The AT commands supported by the modem are described in
Table 4-1. S-Registers are described in Table 4-2.
Issue 1 November 1994
4
4-1