Paradyne 3760 User Manual page 5

Important Regulatory Information
In addition, if the equipment is to be used with
telecommunications circuits, take the following precautions:
– Never install telephone wiring during a lightning storm.
– Never install telephone jacks in wet locations unless the
jack is specifically designed for wet locations.
– Never touch uninsulated telephone wires or terminals
unless the telephone line has been disconnected at the
network interface.
– Use caution when installing or modifying telephone lines.
– Avoid using a telephone (other than a cordless type)
during an electrical storm. There may be a remote risk
of electric shock from lightning.
– Do not use the telephone to report a gas leak in the
vicinity of the leak.
Government Requirements and Equipment Return
Certain governments require that instructions pertaining to
modem connection to the public switched telephone network be
included in the installation and operation manual. Specific
instructions are listed in the following sections.
United States
Notice To Users Of The Public Switched Telephone Network
1. This equipment complies with Part 68 of the FCC rules. On
the equipment is a label that contains, among other
information, the FCC registration number and ringer
equivalence number (REN) for this equipment. If requested,
this information must be provided to the telephone company.
2. The Universal Service Order Code (USOC) associated with
the services the equipment is to be connected is RJ11C.
3. The Ringer Equivalence Number (REN) is used to determine
the quantity of devices which may be connected to the
telephone line. Excessive RENs on the telephone line may
result in the devices not ringing in response to an incoming
call. In most, but not all areas, the sum of the RENs should
not exceed five (5.0). To be certain of the number of devices
that may be connected to the line, as determined by the total
RENs, contact the telephone company to determine the
maximum RENs for the calling area.
C
Issue 1 November 1994