Fax Operation - Paradyne 3760 User Manual

Using Your Modem

Fax Operation

Fax software essentially turns your computer and modem into a
fax machine and allows you to send a file to or receive a file
from another fax modem or fax machine.
Similar to your communications software, your fax software uses
basic AT commands for functions such as dialing and answering
calls and for speaker control and adjustments. Refer to your
communication software's user's guide for more information on
AT command support.
Before sending or receiving a fax, verify the following:
G
Your modem and PC must be configured for modem
operation before executing your fax software.
G
You must have fax software installed on your PC. (For
the KeepInTouch Card modem, if sending or receiving a
fax, the software must be operating.)
G
Some fax software packages require the modem to have
Auto-Answer disabled (S0 = 0) to receive a fax.
G
Some fax software packages require that the modem use
software flow control (\Q1) to send and receive a fax.
Refer to your fax software documentation for more on fax
operation.
3-14
Issue 1 November 1994