At Command List - Paradyne Comsphere 3830 User Manual

COMSPHERE 3800 Series Modems – Model 3830
Numbers Numbers
(1)
30
32
34
** Appears when the Extended Result Codes configuration option is set for Use
DTE Rate. This displays the DTE data rate instead of the line rate.

AT Command List

AT commands are issued from an asynchronous DTE, such as a PC,
and control the modem's operation and software configuration. AT
commands are only applicable when the DTE Dialer Type
configuration option is set for AT. (See &Mn and &Qn commands.)
AT commands are entered while the modem is in Command mode and
use the following format:
TYPE:
Where:
PRESS:
Table 4-2 lists all AT commands supported by the Model 3830 modem.
The Async Dial factory default is listed in bold.
4-6
Table 4-1
Result Codes
Word
(2)
30 CONNECT 57600**
32 CONNECT 76800**
34 CONNECT 115200** Connection at 115,200 bps
ATXn
X is the AT command and n is the specific value for
that command.
Enter
November 1996
(3 of 3)
Connection at 57,600 bps
Connection at 76,800 bps
Description
3830-A2-GB91-20