Table of Contents
Advertisement
AT Command Set and S-Registers
Table 4-1. AT Command Reference (10 of 18)
AT
Command Description
\K n
If Connected and using a Reliable Mode (\N2, \N3, or \N4),
(cont'd)
then transmit break to remote modem:
If in Command mode and using a Reliable Mode (\N2, \N3, or
\N4), then transmit break to remote modem:
If connected and using Direct Mode (\N1), then transmit break
to remote modem:
If connected, receive break from modem port, send break to
serial port:
\K0, \K2, \K4
Enter command state but do not
send a break.
\K1
Destructive/expedited.
\K3
Non-destructive/expedited.
\K5
Non-destructive/non-expedited.
\K0, \K1
Destructive/expedited.
\K2, \K3
Non-destructive/expedited.
\K4, \K5
Non-destructive/non-expedited.
\K0, \K2, \K4
Expedited and enter Command
mode.
\K1, \K3, \K5
Expedited.
\K0, \K1
Destructive/expedited.
\K2, \K3
Non-destructive/expedited.
\K4, \K5
Non-destructive/non-expedited.
Issue 1 November 1994
4-11
Advertisement
Table of Contents
