Ending An Active Test - Paradyne 7974 User Manual

Ending an Active Test

7900-A2-GB21-00
A test initiated by the user can be ended using:
H
The Test Timeout option to automatically terminate a Loopback or Pattern
test (as opposed to manually terminating a test) after it has been running a
specified period of time. The default is 10 minutes. Refer to Table A-7,
System Options.
H
The Command column on each test screen. To manually stop the test, press
Enter when the cursor is on the Stop command.
H
The Abort Tests selection from the Test menu to stop all tests running on all
interfaces, with the exception of network-initiated loopbacks. Command
Complete appears when all tests on all interfaces have been terminated.
An aborted test may continue to run for a few seconds as the abort command
is sent to the remote end and processed.
August 2000
Testing
8-17