H Hotwire Standalone Termination Unit Features - Paradyne 7974 User Manual

About the Hotwire Standalone Termination Unit
Hotwire Standalone Termination Unit Features
1-2
The Hotwire Standalone Termination Unit is an endpoint for the chassis-mounted
Hotwire 877x Termination Unit housed in the Hotwire 8600 Series or 8800 Series
Digital Subscriber Line Access Multiplexer (DSLAM).
Two Hotwire Standalone Termination Units can also be configured to operate in a
central office line termination unit (LTU) to customer premises network
termination unit (NTU) environment.
The termination unit offers these standard features:
H
Embedded Operations Channel (EOC). Provides remote SNMP Traps,
Telnet session capability over the M/SDSL link, and download capabilities.
H
Asynchronous Terminal Interface (ATI). Provides a menu-driven
VT100-compatible terminal interface for configuring and managing the
termination unit locally or remotely by Telnet session.
H
Local Management (standalone unit). Provides local management using a:
— Terminal or equivalent through the COM port of the unit
— Telnet through the COM port of the unit
H
Remote Management (DSLAM card). Provides remote management using:
— VT100-compatible terminal or PC via the Management Serial port of the
DSLAM
— NMS through the MCC port of the DSLAM
— Telnet over the EOC
H
Alarm Indication. Provides front panel status LEDs.
H
Diagnostic Testing. Provides the capability to diagnose device and network
problems and perform digital loopbacks, pattern tests, and self-test.
H
Device and Performance Monitoring. Provides the capability of tracking
and evaluating the unit's operation, including health and status, and error-rate
monitoring.
H
SNMP ( Simple Network Management Protocol ) Management. Provides
network management via an industry-standard SNMP management system.
H
Automatic Configuration Capability. Simply connecting the units to the line
automatically configures the customer for the maximum data rate supported
by the local loop. Units can also be configured at fixed line speeds to achieve
maximum distances.
August 2000 7900-A2-GB21-00