Network Configuration - Paradyne 7974 User Manual

Network Configuration

7900-A2-GB21-00
Figure 1-1 shows a network application using a termination unit in a central office
(CO). In this configuration, a frame relay switch and a router are connected
through the termination unit to partner units supporting a host or router, and
frame relay encapsulated or unframed data. The figure also shows a
standalone-to-standalone configuration. Supported standalone-to-standalone
configurations are shown in Table 1-1.
Table 1-1. Supported Standalone NTU/LTU Combinations
DSX-1
LTU (CO):
DSX-1
Synchronous Not Supported
G.703 Framed Not Supported
G.703 Unframed Not Supported
n = Supported
G.703, DSX-1 or V.35
Frame
Relay
Switch
Router
877x Termination Unit
CO Site
LTU
797x
Figure 1-1. Sample Configurations
August 2000
About the Hotwire Standalone Termination Unit
NTU (CP)
Synchronous
n n
n
n
n
CO Site Customer Premises (CP)
DSL
DSL
DSL
in DSLAM
DSL
G.703 G.703
Framed Unframed
Not Supported Not Supported
n
Not Supported
n
Not Supported
n
Not Supported
T1 Host
(Frame Relay
797x
Encapsulated
Data)
Router
(Frame Relay
797x
Encapsulated
Data)
Router
797x
CP
NTU
797x
00-16486-01
1-3