Husqvarna P 524XR EFI Operator's Manual page 72

Table of Contents

Advertisement

Available languages

Available languages

Problem
The transmission does not have suffi-
cient power.
The battery does not charge.
There is vibration in the product.
The cutting result is unsatisfactory.
Display - Troubleshooting
Symbol
72
Cause
The pump belt is not correctly tightened.
The RPM between the front and rear axle are not correctly adjusted.
There is no oil in the transmission or the oil level is too low. Refer to
check of the transmission oil level on page 62 .
The battery is damaged. Speak to your Husqvarna servicing dealer.
The connection at the cable connectors on the battery terminals is bad.
The blades are loose. Refer to
One or more of the blades are not balanced. Refer to
on page 60 .
The engine is loose.
There is grass blockage in the cutting deck. Refer to
page 45 .
The blades are blunt. Refer to
The grass is long or wet. Refer to
The parallelism of the cutting deck is not adjusted. Refer to
the parallelism of the cutting deck on page 55 .
The cutting deck is not level.
There is grass blockage in the cutting deck. Refer to
page 45 .
The tire pressure is different on the right and left sides. Refer to
sure on page 51 .
The product is operated at a too high speed. Refer to
result on page 34 .
The engine speed is too low. Refer to
The drive belt slips.
The cable to cutting deck is not connected. Refer to
deck on page 26 .
The cable to the cutting deck is compressed. Refer to
deck on page 26 .
The function button for front accessories is not correctly connected.
Name
Indicator of hydraulic oil
temperature
To examine the blades on page 60 .
To replace the blades on page 60 .
To get a good cutting result on page 34 .
Shows on the display
The symbol shows.
The symbol flashes
quickly.
To examine the blades
To clean the product on
To do a check of
To clean the product on
To get a good cutting
To operate the product on page 31 .
To attach the cutting
To attach the cutting
Cause
The engine temperature is too high.
Speak to your Husqvarna servicing
dealer.
1929 - 003 - 05.12.2023
To do a
Tire pres-

Advertisement

Table of Contents
loading

Table of Contents