Installing Windows Drivers
Before printing, scanning or using ControlCentre with the
2218, you will need to install a driver.
The procedure will install the driver and configure it for the local port.
FaxCentre 2218
Insert the Xerox Drivers CD into the CD drive.
1
Within a few seconds, the CD should start automatically and present you with the opening
screen. If this does not happen, go to the [Start] menu, choose [Run] and browse to the CD
drive. Select setup.exe and click [Open]. Click [OK] to start the installation procedure.
When the language selection window appears, select the appropriate language and click
2
[Next].
Choose the components you want to install and then click [Next]..
3
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
WorkCentre 4118 / FaxCentre
Page 8-7