Enabling/Disabling Raw Tcp/Ip Printing - Xerox FaxCentre 2218 System Administration Manual
Xerox faxcentre 2218: user guide
Hide thumbs
Also See for FaxCentre 2218:
- User manual (212 pages) ,
- Voluntary product accessibility template (11 pages) ,
- Service manual (10 pages)
Table of Contents
Advertisement
Enabling/Disabling Raw TCP/IP Printing
This procedure is used to enable or disable the Raw Printing port on the WorkCentre 4118 /
FaxCentre 2218. Once the port is enabled, you can change the Raw Printing port number.
NOTE:
2218 will accept RAW print jobs, it is recommended that you use the default port, 9100. This
is the industry standard. To change Port number see "Using CentreWare Internet Services"
on page 7-3.
To enable the Raw Printing port, at the WorkCentre 4118 / FaxCentre 2218, perform these
steps:
Ensure the basic TCP/IP settings have been made (see "Basic TCP/IP Settings" on page
1
2-5).
2
Press the [Machine Status]
button.
3
Press
Admin Tools displays and press
[Enter].
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
Page 6-6
While you can change the port number at which the WorkCentre 4118 / FaxCentre
or
until System
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
Machine Setup
Fax Setup
System Admin Tools
[Passcode Protect]
Advertisement
Table of Contents
