Enabling/Disabling HTTP
This procedure is used to enable or disable Hypertext Transfer Protocol (HTTP) on the
WorkCentre 4118 / FaxCentre 2218.
To enable HTTP, at the WorkCentre 4118 / FaxCentre 2218, perform these steps:
Ensure the basic TCP/IP settings have been made (see "Basic TCP/IP Settings" on page
1
2-5).
2
Press the [Machine Status]
button.
3
Press
Admin Tools displays and press
[Enter].
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
4
Press
Setup displays and press [Enter].
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
or
until System
or
until Network
Machine Setup
Fax Setup
System Admin Tools
[Passcode Protect]
System Admin Tools
[Network Setup]
Page 6-9