4
Press
displays and press [Enter].
Choose Yes to reset the network
card.
Config Network
To configure the network:
1
Press the [Machine Status]
button.
2
Press
Admin Tools displays and press
[Enter].
If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
3
Press
Setup displays and press [Enter].
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
or
until Reset NIC
or
until System
or
until Network
Network Setup
[Reset NIC]
Machine Setup
[Fax Setup]
System Admin Tools
[Passcode Protect]
System Admin Tools
[Network Setup]
Page 10-3