Network Tools
Three tools are provided for the network:
Reset NIC - resets the network card after changes have been implemented.
Factory Defaults- restores all settings to their factory state.
Configure Network - provides walk-up configuration of network settings.
Reset NIC
To reset the network card:
1
Press the [Machine Status]
button.
2
Press
Admin Tools displays and press
[Enter].
If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
3
Press
Setup displays and press [Enter].
Page 10-2
or
until System
or
until Network
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
Machine Setup
Fax Setup
System Admin Tools
[Passcode Protect]
System Admin Tools
[Network Setup]