Enabling or Disabling TCP/IP
At the WorkCentre 4118 / FaxCentre 2218, perform these steps:
1
Press the [Machine Status]
button.
2
Press
Admin Tools displays and press
[Enter].
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
3
Press
Setup displays and press [Enter].
4
Press
Network displays and press
[Enter].
Page 2-6
or
until System
or
until Network
or
until Configure
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide
Machine Setup
Fax Setup
System Admin Tools
[Passcode Protect]
System Admin Tools
[Network Setup]
Network Setup
[Config. Network]