Ipp - Xerox FaxCentre 2218 System Administration Manual

IPP

Use these instructions to setup IPP using CentreWare Internet Services.
NOTE: The HTTP settings for the device will have been setup when completing the Enabling
CentreWare Internet Services section.
To complete the installation of the device, perform these steps:
Open CentreWare Internet Services (see Accessing CentreWare Internet Services on
1
page 7-4).
At the CentreWare Internet Services Home Page for the WorkCentre 4118 / FaxCentre
2
2218, select the [Properties] tab.
Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, and
3
then select the [+] symbol to the left of the Protocols folder.
Select [IPP].
4
Select the checkbox to enable IPP.
Check the IPP Configuration details are correct. If any of the details are incorrect then
enter the required configuration det
Click the [Apply] button to implement any changes.
5
NOTE: Click the [Undo] button to cancel any changes made and return to the previous
values.
Select the [Status] tab and then select [Reboot Machine] to enable the selections to take
6
effect.
Continue with Test Print, see Test Print 8-16.
7
Page 7-18
ails in the appropriate boxes.
Xerox WorkCentre 4118 and FaxCentre 2218 System Administration Guide