Setting Up; Setting Up Tv Channels Automatically; Using Auto Installation; Setting Up Analogue Tv Channels Manually - Pioneer PDP-507XDA Operating Instructions Manual

Setting up

Chapter 8
Setting up

Setting up TV channels automatically

This section describes how to automatically search for and set up
TV channels.

Using Auto Installation

When the plasma display is switched on for the first time after
purchase, the initial auto installation is initiated. You can set tuner
type and region in successive operations.
Auto Installation
Tuner Type
Region
Installation
1 Select "Tuner Type" (/).
2 Select the desired tuner type (/).
• You can select from "All", "Digital" or "Analogue".
• When you select "All", set up DTV channels then analogue
channels in successive operations. When you select
"Digital", only DTV channels are scanned. Likewise, when
you select "Analogue", only analogue TV channels are
scanned.
3 Select "Region" (/).
4 Select your region (/).
• Select the city or region in which you live. If it is not listed,
select "Auto Detection" for automatic setup.
5 Select "Start" (/ then ENTER).
Auto Installation automatically starts.
• To quit Auto Installation in progress, press RETURN.
6 After Auto Installation finishes, press HOME MENU to
exit.
Note
• You can start Auto Installation from the Home menu after
moving to another city, for example. Perform the following
steps before starting Auto Installation: Press HOME MENU,
select "Setup" (/ then ENTER), then "Auto Installation" (/
 then ENTER). The password entry screen appears. Enter
your 4-digit password using buttons 0 to 9.
• If no channels are found, check the antenna connections, and
then retry Auto Installation.

Setting up analogue TV channels manually

Use the Manual Adjust function to set up analogue TV channels
manually.
1
2
3
All 4
Auto Detection
5
6
Start
7
8
Press HOME MENU.
Select "Setup" (/ then ENTER).
Select "Analogue TV Setup" (/ then ENTER).
The password entry screen appears. Enter your 4-digit
password using buttons 0 to 9. For the password, see Using a
password on page 49.
Select "Manual Adjust" (/ then ENTER).
Select "Programme Entry" (/).
Select a programme number (/).
You can select 1 through 99.
Manual Adjust
Programme Entry
Search
System
Colour System
Store
Tuner NR
Child Lock
High Deviation
Select "Search" (/).
Enter a frequency using buttons 0 to 9, then ENTER.
You can also press / to enter a frequency.
Manual Adjust
Programme Entry
Search
System
Colour System
08
1
44.25MHz
B/G
PAL
Yes
On
View
Off
1
44.25MHz
B/G
PAL
27
En