Customizing The Sound Settings; Adjusting The Volume Automatically; Setting The Surround Sound; Setting Up External Digital Sound - Pioneer PDP-4214HD Operating Instructions Manual

09 Adjustments and Settings

Customizing the Sound Settings

This Plasma Display has several setting options that allow you
to control the sound quality.
1
Press the MENU button.
2 Press the c or d button to move to Sound, then press
the a or OK button.
3
Press the c or d button to select the required option
(Bass, Treble, or Balance).
4 Press the b or a button until you reach the optimal
setting.
Bass: 0~100
Treble: 0~100
Balance: L50~0~R50
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out
Move Adjust
| button
Item
Bass For weaker bass
Treble For weaker treble
Balance Decreases audio from Decrease audio from
the right speaker
5
Press the EXIT button.
• If you make any adjustment to the "Bass" or "Treble", the "Effect" is
automatically switched to "User". Also, if you make any adjustment
to the "Balance", the "Effect" is not switched.

Adjusting the Volume Automatically

This feature allows you to automatically adjust the volume of
every channel by lowering the sound output when the
modulation signal is high or by raising the sound output when
the modulation signal is low.
1
Press the MENU button.
2
Press the c or d button to move to Sound, then press
the a or OK button.
3 Select Auto Volume Level and press the a or OK button
again.
4 Press the c or d button to select the required option (On
or Off).
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out
Move Enter
• The factory default is "Off".
5
Press the EXIT button.
34
En
Flat
50
50
R 1
Off
On
PCM
Return
\ button
For stronger bass
For stronger treble
the left speaker
On
Flat
50
Off
50
R 1
Off
On
PCM
Return

Setting the Surround Sound

You can enjoy the virtual surround sound effect.
1
Press the MENU button.
2 Press the c or d button to move to Sound, then press
the a or OK button.
3
Press the c or d button to move to SRS TruSurrond XT,
then press the a or OK button.
4 Press the c or d button to select the required option (On
or Off).
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out
Move Enter Return
5
Press the EXIT button.
is a trademark of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS Labs, Inc.
• If you switch the "SRS TruSurrond XT" setting, the sound type is
automatically switched to "User".

Setting up External Digital Sound

You can enjoy the Dolby Digital* sound effect with the DIGITAL
OUT connected to an external digital audio decoder.
1
Press the MENU button.
2
Press the c or d button to move to Sound, then press
the a or OK button.
3 Press the c or d button to move to Digital Audio Out,
then press the a or OK button.
4 Press the c or d button to select the required option
(PCM or Ÿ Digital).
Sound
Effect
Bass
Treble
Balance
Auto Volume Level
SRS TruSurround XT
Digital Audio Out
Move Enter Return
Item Description
PCM (factory Always the sound is output in the PCM
default) format regardless of the types of signals.
Ÿ Digital
For Dolby Digital encoded signals, the sound
is output in the Dolby Digital format. For
PCM encoded signals, the sound is output in
the PCM format.
5
Press the EXIT button.
• This setting is effective only for the signal of digital TV when
you select DIGITAL CH.
Flat On
50
Off
50
R 1
Off
On
PCM
Flat PCM
50 Digital
50
R 1
Off
On
PCM