Installing The Media Receiver; Installing The Media Receiver Vertically - Pioneer PureVision ElitePRO-920HD Operating Instructions Manual

06 Preparation

Installing the Media Receiver

Plasma Display
System cable (approx. 3 m/9.8 feet)
• Do not place a VCR or any other device on the top of the
Media Receiver.
• When installing, allow enough space on the sides and
above the Media Receiver.
• Do not block the side cooling vents or the rear ventila-
tion fan opening of the Media Receiver.
POWER
REC DATA
ON STANDBY
TIMER ACQUISITION
Over 5 cm
(2 inches)
Over 10 cm
(3 15 /16
Over 5 cm Over 5 cm
(2 inches) (2 inches)
16
En
Media Receiver
(vertical installation)
(horizontal installation)
POWER
REC DATA
ON STANDBY
TIMER ACQUISITION
Over 5 cm
(2 inches)
Over 5 cm
(2 inches)
inches)
Over 5 cm
(2 inches)

Installing the Media Receiver vertically

You can use the supplied stand to install the Media Receiver
vertically.
1. Insert the stand into the side of the Media
Receiver.
Right side
2. Secure the stand with the supplied screws.
Over 10 cm
(3 15 /16 inches)
Screws