Introduction to the Flat Panel Displays
1.2 Control Options: Get to Know Your Flat Panel Display
You can operate your flat panel display from the panel buttons or with the remote control. The following sections
provide button locations/operations for the panel and the remote control.
1.2.1
Control Buttons and More on the Flat Panel Display
Your flat panel display has buttons, indicators, and sensors on the lower front bezel with more buttons on the rear
panel. Refer to the drawings below for specific locations and functions. Or, to identify back ports and terminals
only, check the terminal position sheet located near the panel's terminal compartment.
Left side
Bottom
1
1 - Power On () button
2 - Power On indicator
3 - STANDBY indicator
4 - Room Light sensor
KRP-600M/KRP-500M: Face of Panel
(KRP-600M)
2
3
Front
5 - Remote Control sensor
6 - Volume Up/Down buttons
7 - INPUT button
8 - STANDBY/ON button
Right side
Right side
4
5
6
6
7
8
Viewed from
7
8
the rear of
the panel
(KRP-500M)
01
7
En