Navigation - ABB SACE Emax 2 Series Operating Instructions Manual

2 - Navigation

Levels and pages The Ekip Touch menu is divided into several levels, all accessible using the touchscreen display and
40 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
buttons available in the units:
Level 1 (HOME)
Page shown on power up; appears when push-button of the same name appears, as described on page
39; from here you can:
1. access the MAIN PAGE (level 2), by pressing the HOME button
2. access the Alarm list , by selecting the diagnostic bar at the bottom
3. access the Summary pages of some of the measurements by pressing on the edges
Figure 7
NOTE: Ekip Touch is supplied with the Histograms page configured as HOME; if the
configuration is different, the Histograms can be set as the main page by pressing and
holding the HOME key for five seconds and confirming the message on the display
Level 2 (MAIN PAGE)
This page allows you to:
4. access one of the graphic pages: Histograms , Measuring instruments and Measurements
5. access the MENU AREA (level 3)
Figure 8
ABB | SACE Emax 2
Continued on the next page
Ekip Touch - Interface and menus
2 - Navigation