Accessories And Software - ABB SACE Emax 2 Series Operating Instructions Manual

3 - Accessories and software

Internal and external
accessories
Additional functions Ekip Touch can be equipped with further software configurations compliant with different functional
19 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
The functions of Ekip Touch can be expanded by further internal and external accessories, which differ as
to function and assembly position; certain accessories can also be configured with Ekip Dip.
Internal modules
Name Function
Measurement Measurement and supply from installation voltages
(1)
Ekip Signalling 4K Programmable digital inputs/outputs
(2)(5)
Ekip LCD LCD interface for aggressive environments
Rating Plug Defines rated current In
(3)(6)
External modules for assembly in upper terminal box
Name Description
Ekip Supply
(6) Power supply of Trip unit and modules in terminal box
Communication between Trip unit and external buses (various
Ekip Com
(4)
protocols)
Communication between Trip units via an intranet with ABB
Ekip Link
(4)(6)
proprietary protocol
Ekip Signalling 2K
Programmable digital inputs/outputs
Ekip Signalling 3T
Measurement from current loop and temperature sensors
Measurement of an external voltage and management of
Ekip Synchrocheck
synchronism between two supply sources
Other external modules and accessories:
Name Description
Ekip Signalling 10K Programmable digital inputs/outputs
(5)(6)
Ekip Multimeter Panel front display
(5)(6)
Toroid S.G.R. Sensor for protection from earth fault currents
Toroid Rc Sensor for protection from residual currents
Sensor for protecting the external neutral line with 3P
External neutral
(6)
circuit-breaker
In addition, the supervision, configuration and reporting functions are provided by further modules for
temporary communication and supply:
Name Description
Ekip TT Supply and tests
(6)
Ekip T&P Supply, communication, programming and tests
(6)
Ekip Programming Supply, communication and programming
(6)
Version and availability of the module depend on the Trip unit model and on activation of the
(1)
measurements package
Configurable with circuit-breakers E2.2, E4.2 and E6.2
(2)
Assembled by default at the time equipment is ordered; can be replaced afterwards with a model
(3)
of a different size
(4) Always supplied with contacts Ekip AUP and Ekip RTC
Presence of auxiliary supply required and, for terminal box models, of Ekip Supply
(5)
Accessory also available and compatible with Ekip Dip
(6)
applications:
• Power Controller
• Load Shedding
• Interface protections (IPS)
• Synchro reclosing
• Embedded ATS
For details consult the Technical catalog or the summary documents of each function (page 14).
:
(5)
3 - Accessories and software
ABB | SACE Emax 2
Page
205
208
211
204
Page
212
213
236
244
253
247
Page
256
257
257
257
258
Page
259
Trip unit Overview