Main Page; Start Page; Navigation - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Main page The main page is the page for accessing the level 2 pages.
Start page When switched on, the start page is displayed on the display. The system returns automatically
Navigation The following table illustrates how to access the pages through the keys:
59 | © 2013 ABB | 1SDH001000R0002 - L7804
The page appears as follows:
Figure 67
The following table provides a description of the various areas of the page:
Pos. Function
A Opens the Histograms page.
B Opens the Menu page.
C Opens the Measuring instruments page.
D Opens the Measurements page.
E In the presence of messages, open the Alarm List page.
to this page after some minute of inactivity. The default start page is the page Histograms.
Any graphical level 2 page (accessible from the main page) can be set as the start page,
except for the pages Alarm List and Menu.
To set a page as the start page, you need to:
1. Open the page
2. Keep the HOME key pressed for at least 5 seconds.
3. Select Yes in the confirm window that has opened.
To open...
The main page
The start page
The Alarm List page
Perform these operations...
Press the HOME key.
Press the HOME key, until the start page appears.
If there are messages present, if the diagnostics bar is
displayed:
• Touch the display in the message display area, or
• Press the iTEST button.
Ekip Touch protection release | 1 - Layout of the interface
ABB | SACE Emax 2