External Electronic Accessories; Ekip Supply - ABB SACE Emax 2 Series Operating Instructions Manual

External electronic accessories

1 - Ekip Supply

Electrical characteristics
Connections The module must be assembled in the first slot of the terminal box on the circuit-breaker (fixed version)
212 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
Ekip Supply is an accessory supply module. It is available in two models, depending on the incoming
voltage to be provided.
It performs three functions:
• supplies auxiliary power to Ekip Touch
• allows the terminal box modules to be supplied and connected to Ekip Touch
• acts as a bridge for the Local Bus between Ekip Touch and the external electronic accessories (e.g.
Ekip Signalling 10K and Ekip Multimeter )
The module has a Power led to signal the presence of incoming power supply:
• off: power supply absent
• on (steady): power supply present
Model
Power supply voltages
Frequency
Maximum power consumption without modules
(1)
Maximum power consumption with modules
Maximum inrush current
Ekip Touch with just Ekip Supply
(1)
Ekip Touch with three modules connected
(2)
or on the fixed part (withdrawable version).
For references about the connection and terminals, please consult document 1SDM000091r0001; use
AWG 22-16 cables with 1.4 mm maximum outer diameter for the external cabling.
To connect the module to Ekip Touch, please consult document 1SDH001000r0511.
Ekip Supply
24-48VDC
21,5 ÷ 53 VDC
--
3 W
(2) 10 W
2 A for 20 ms
External electronic accessories
ABB | SACE Emax 2
Ekip Supply
110-240 VAC/DC
105 ÷ 265 VAC/DC
45 ÷ 66Hz
3 VA/W
10 VA/W
2 A for 20 ms
1 - Ekip Supply