6) Select the desired speed level by pressing the
+ button 3. Press the - button 4 to reduce the
speed again.
You can choose between 5 speed levels and
an additional level (Turbo/6) by pressing
and holding the Turbo button 5 (see section
"Speed levels").
The display 2 shows the selected speed level
(SPEED) q and the running time (TIME) w.
The running time counts up to :
it starts again at :
time of 10 minutes.
7) Move the On/Off switch 1 to OFF when
you have finished processing the mix.
The display 2 goes out.
8) Pull the whisks 9 / kneading hooks 0 out
of the mix.
9) Press the tool-release button 1 to release the
whisks 9 / kneading hooks 0.
For safety reasons, the whisks 9 or
Note:
kneading hooks 0 can only be released when
the On/Off switch 1 is in the OFF position.
Cleaning
DANGER!
RISK OF ELECTRICAL SHOCK!
Always remove the plug 6 from the power
►
socket before cleaning the appliance! There is
a risk of electric shock!
Never submerge the hand element 7 in
water or other liquids!
Clean the hand element 7 containing the mo-
■
tor only with a damp cloth and, if necessary,
with a mild detergent.
■
8
│
GB │ IE
, after which
. Always observe the CO
The whisks 9 and the kneading hooks 0 can
■
be cleaned under running water or in warm
water with detergent. Dry all parts thoroughly
after cleaning.
We recommend cleaning the attachments di-
rectly after use. This removes food residue and
reduces the risk of bacterial contamination.
Note:
The whisks 9 and the kneading hooks 0
can also be cleaned in the dishwasher.
Storage
■
Store the cleaned appliance in a clean, dust-
free and dry location.
Disposal
Applies only to France:
The product, its packaging and the operating
instructions are recyclable. They are subject to an
extended manufacturer responsibility and will be
collected separately.
SHMD 500 A1