Table of Contents
Advertisement
78
GETTING TO KNOW YOUR VEHICLE
5. Repeat with the left side quarter window.
Step Five
6. Engage the rear window retainers in the lower right
and left corners.
Step Six
NOTE:
For information on removing your soft top, refer to the
next section.
REMOVING THE SOFT TOP
Use this QR code to access your digital
experience.
1. Fully lower the soft top
page 74.
CAUTION!
Failure to follow the next steps could result in dam-
age to the Soft Top or vehicle.
2. Make sure the lift assist mechanism on both the left
and right sides are in the "lock" position, and an
audible "click" is heard when pushing down on the
#1 bow from each of the lift assist mechanisms
before removing.
Step Two
3. Using the provided #40 Torx head driver and
ratchet, unscrew the two Torx head screws on each
lift assist mechanism, then lift the mechanism up
and away from the vehicle.
Scan me
1 — Lock Position
2 — Torx Head Screw
3 — Torx Head Screw
4. Pull the release lever on top of the rail rearward to
release the side link from the track.
Step Three
Step Four
Advertisement
Table of Contents
