Jeep WRANGLER 2023 Owner's Manual page 111

Hide thumbs Also See for WRANGLER 2023:
Table of Contents

Advertisement

Driver Assist — If Equipped
The Driver Assist menu displays the status of the ACC
systems.
Push and release the up
or down
until the Driver Assist menu is displayed in the instru-
ment cluster display.
Adaptive Cruise Control (ACC) Feature — If Equipped
The instrument cluster display displays the current ACC
system settings. The information displayed depends on
ACC system status.
Push the ACC ON/OFF button (located on the steering
wheel) until one of the following displays in the instru-
ment cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read "Adaptive
Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed setting
has not been selected, the display will read "Adaptive
Cruise Control Ready."
Push the SET + or the SET - button (located on the
steering wheel), and the following will display in the
instrument cluster display.
ACC SET
When ACC is set, the set speed will display in the instru-
ment cluster.
The ACC screen may display once again if any of the
following ACC activity occurs:
System Cancel
Driver Override
System Off
ACC Proximity Warning
ACC Unavailable Warning
NOTE:
The instrument cluster display will return to the last
display selected after five seconds of no ACC display
activity
page 147.
arrow button
Fuel Economy
Push and release the up
until the Fuel Economy icon is highlighted in the instru-
ment cluster display. Push and hold the OK button to
reset average fuel economy feature.
Toggle left
or right
without Current Fuel Economy Information.
Range – The display shows the estimated distance
(mi or km) that can be traveled with the fuel remain-
ing in the tank. When the Range value is less than
10 miles (16 kilometers), the Range display will
change to a "LOW" message. Adding a significant
amount of fuel to the vehicle will turn off the "LOW"
message and a new Range value will display. Range
cannot be reset through the OK button.
NOTE:
Significant changes in driving style or vehicle load-
ing will greatly affect the actual drivable distance of
the vehicle, regardless of the Range displayed value.
Average – The display shows the average fuel
economy (MPG, L/100 km, or km/L) since the last
reset.
Current – This display shows the current fuel
economy (MPG, L/100 km, km/L) while driving.
Trip Info
Push and release the up
until the Trip icon/title is highlighted in the instrument
cluster display, then push and release the left
right
arrow button to select Trip A or Trip B.
GETTING TO KNOW YOUR INSTRUMENT PANEL
The Trip A and Trip B information will display the
following:
Distance
Average Fuel Economy
Elapsed Time
Hold the OK button to reset all the information.
or down
arrow button
Stop/Start — If Equipped
Push and release the up
until the Stop/Start icon/title is highlighted in the
to select a display with or
instrument cluster display. The screen will display the
Stop/Start status.
Audio
Push and release the up
until the Audio Menu icon/title is highlighted in the
instrument cluster display. This menu will display the
audio source information, including the Song name,
Artist name, and audio source with an accompanying
graphic.
Messages
Push and release the up
until the Messages Menu item is highlighted. This fea-
ture shows the number of stored warning messages.
Pushing the right
what the stored messages are.
When no messages are present, a "No Stored Mes-
sages" will display.
or down
arrow button
or
109
3
or down
arrow button
or down
arrow button
or down
arrow button
arrow button will allow you to see

Advertisement

Table of Contents
loading

Table of Contents