Removing The Soft Top - Jeep GLADIATOR 2022 Owner's Manual

6. Engage the vertical retainers up the right and left
side of the rear window.
Step Six
7. Tuck the rear window under the soft top fabric and
press firmly.
Step Seven
8. Engage the rear window retainers in the lower right
and left corners.
CAUTION!
Quarter panel cover assemblies and rear window
must be either all in or all out.

REMOVING THE SOFT TOP

Use this QR code to access your digital
experience.
1. Fully lower the soft top to the Sunrider® position
page 71.
CAUTION!
Failure to follow the next steps could result in dam-
age to the soft top or vehicle.
2. Using the provided #T50 Torx head driver and
ratchet, unscrew the two Torx head fasteners on the
inside of each top mechanism.
GETTING TO KNOW YOUR VEHICLE
Scan me
3. Utilizing two people, lift the soft top up and away
from the vehicle, careful to avoid the vehicle's sport
bar and trim. Store the soft top in a safe, clean, and
dry location.
4. Remove the door frames. The rear door frames
must be removed before the front door frames
page 88.
5. Using the provided #T50 Torx head driver and
ratchet, unscrew the six Torx head fasteners on both
rear corners and the back of the cab, then remove
the belt rail.
NOTE:
Folding down the rear seats is recommended to pro-
vide easier access to the fasteners.
79
2
Step Two