Table of Contents
Advertisement
148
STARTING AND OPERATING
WARNING!
while driving to maintain safe control of your
vehicle. Failure to follow these warnings can result
in a collision and death or serious personal injury.
•
The ACC system:
○
Does not react to pedestrians, oncoming
vehicles, and stationary objects (e.g., a stopped
vehicle in a traffic jam or a disabled vehicle).
○
Cannot take street, traffic, and weather condi-
tions into account, and may be limited upon
adverse sight distance conditions.
○
Does not always fully recognize complex driving
conditions, which can result in wrong or missing
distance warnings.
○
On vehicles with an automatic transmission, will
bring the vehicle to a complete stop while follow-
ing a vehicle ahead and hold the vehicle for two
seconds in the stop position. If the vehicle
ahead does not start moving within two sec-
onds, the ACC system will display a message
that the system will release the brakes and that
the brakes must be applied manually. An
audible chime will sound when the brakes are
released.
•
You should not utilize the ACC system:
○
When driving in fog, heavy rain, heavy snow,
sleet, heavy traffic, and complex driving situa-
tions (i.e., in highway construction zones).
○
When entering a turn lane or highway off-ramp;
when driving on roads that are winding, icy,
snow-covered, slippery, or have steep uphill or
downhill slopes.
○
When towing a trailer up or down steep slopes.
○
When circumstances do not allow safe driving at
a constant speed.
Adaptive Cruise Control (ACC) Operation
The buttons on the right side of the steering wheel
operate the ACC system.
Adaptive Cruise Control Buttons
1 — Distance Setting Increase
2 — Adaptive Cruise Control (ACC) On/Off
3 — Distance Setting Decrease
Adaptive Cruise Control (ACC) Menu
The instrument cluster display will show the current ACC
system settings. The information it displays depends on
ACC system status.
Push the Adaptive Cruise Control (ACC) on/off button
until one of the following appears in the instrument
cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read "Adaptive
Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated, but the vehicle speed setting
has not been selected, the display will read "Adaptive
Cruise Control Ready."
Adaptive Cruise Control Set
When the SET (+) or the SET (-) button is pushed, the
display will read "ACC SET."
When ACC is set, the set speed will show in the instru-
ment cluster display.
The ACC screen may display once again if any of the
following ACC activity occurs:
•
System Cancel
•
Driver Override
•
System Off
•
ACC Proximity Warning
•
ACC Unavailable Warning
The instrument cluster display will return to the last
display selected after five seconds of no ACC display
activity.
Activating Adaptive Cruise Control (ACC)
The minimum set speed for the ACC system is 20 mph
(32 km/h).
When the system is turned on and in the ready state,
the instrument cluster displays "ACC Ready."
When the system is off, the instrument cluster displays
"Adaptive Cruise Control (ACC) Off."
NOTE:
You cannot engage ACC under the following conditions:
•
When in 4WD Low
•
When the brakes are applied
•
When the parking brake is applied
Advertisement
Table of Contents
