Jeep WRANGLER 2023 Owner's Manual page 172

Hide thumbs Also See for WRANGLER 2023:
Table of Contents

Advertisement

170
STARTING AND OPERATING
CAUTION!
Do not use a fascia/bumper-mounted clamp-on
tow bar on your vehicle. The bumper face bar will
be damaged.
Shifting Into (N) Neutral
Use the following procedure to prepare your vehicle for
recreational towing:
WARNING!
You or others could be injured or killed if you leave
the vehicle unattended with the transfer case in the
(N) Neutral position without first fully engaging the
parking brake. The transfer case (N) Neutral position
disengages both the front and rear driveshafts from
the powertrain, and will allow the vehicle to roll, even
if the automatic transmission is in PARK (or manual
transmission is in gear). The parking brake should
always be applied when the driver is not in the
vehicle.
CAUTION!
It is necessary to follow these steps to be certain that
the transfer case is fully in (N) Neutral before recre-
ational towing to prevent damage to internal parts.
1. Bring the vehicle to a complete stop on level ground.
2. Press and hold the brake pedal.
3. Shift the automatic transmission into NEUTRAL or
press the clutch pedal on a manual transmission.
4. Turn the engine off.
5. Shift the transfer case lever into (N) Neutral.
6. Start the engine.
7. Shift the transmission into REVERSE.
8. Release the brake pedal (and clutch pedal on
manual transmissions) for five seconds and ensure
that there is no vehicle movement.
9. Repeat steps seven and eight with automatic trans-
mission in DRIVE or manual transmission in FIRST
gear.
10. Turn the engine off.
11. Firmly apply the parking brake.
12. Shift the transmission into PARK or place manual
transmission in gear (NOT in NEUTRAL).
CAUTION!
Damage to the transmission may occur if the trans-
mission is shifted into PARK with the transfer case in
(N) Neutral and the engine running. With the transfer
case in (N) Neutral ensure that the engine is OFF
before shifting the transmission into PARK.
13. Attach the vehicle to the tow vehicle using a suit-
able tow bar.
14. Release the parking brake.
Shifting Out of (N) Neutral
Use the following procedure to prepare your vehicle for
normal usage.
1. Bring the vehicle to a complete stop, leaving it con-
nected to the tow vehicle.
2. Firmly apply the parking brake.
3. Start the engine.
4. Press and hold the brake pedal.
5. Shift the transmission into NEUTRAL.
6. Turn the engine off.
7. Shift the transfer case lever to the desired position.
NOTE:
When shifting the transfer case out of (N) Neutral,
the engine should remain off to avoid gear clash.
8. Shift the automatic transmission into PARK, or place
manual transmission in NEUTRAL.
9. Release the brake pedal.
10. Disconnect vehicle from the tow vehicle.
11. Start the engine.
12. Press and hold the brake pedal.
13. Release the parking brake.
14. Shift the transmission into gear, release the brake
pedal (and clutch pedal on manual transmissions),
and check that the vehicle operates normally.

Advertisement

Table of Contents
loading

Table of Contents