Table of Contents
Advertisement
2. Local remote controller
2-2. MA remote controller [PAR-21MAA]
TIME SUN MON TUE WED THU FRI SAT
TIMER
AFTER
ERROR CODE
ONLY1Hr.
TEMP.
MENU
ON/OFF
BACK
MONITOR/SET
DAY
PAR-21MAA
CLOCK
High-quality white color body and light-green display.
Dot LCD is applied.
Choose from Japanese, Chinese, English, German,
Spanish, Russian, Italian, French displays.
Connectable to all CITY MULTI indoor units, and automati-
cally adjust its function with the connected indoor unit.
Limiting the temperature setting range is possible.
Helps to avoid over-cooling or over-heating. Saves energy.
Auto-stop timer is available.
Helps to avoid forgetting to turn off the air conditioner.
Weekly scheduler is available.
ON/OFF/Temperature setting 8 times per day, 1 week
scheduling.
Grouping via cross-over wire directly.
Usable as the local remote controller for system con-
troller (MELANS)
Combining ME remote controller and/or LOSSNAY
remote controller in a group is not possible.
System example
Non-polarized
2-wire
MA
remote
controller
External dimension
Hr
ON
AFTER
OFF
FUNCTION
FILTER
WEEKLY
SIMPLE
AUTO OFF
ON/OFF
FILTER
CHECK
TEST
OPERATION
CLEAR
Prohibition/permission
of specified mode
(Cooling prohibited
/heating prohibited
/cooling-heating prohibited)
Indoor unit intake
temperature
Non-polarized
2-wire
MA
remote
controller
(Front view)
1
[5-
/
]
130
8
CONTROLLER
Functions
Item
ON/OFF
ON and OFF operation for a single group
Switches between Cool / Dry / Auto / Fan / Heat.
Operation modes vary depending on the air conditioner unit.
Operation mode
Auto only supported for the City Multi R2 and WR2 series.
switching
Sets the temperature for a single group
Range of temperature setting
Temperature
Cool/Dry :
TEMP.
setting
:
Heat
Auto
:
( ) For PEFY/PFFY by setting DipSW 7-1 to ON and limits to NI6H fan speed only.
Models with 4 air flow speed settings: Hi/Mid-1/Mid-2/Low
Fan speed
Models with 3 air flow speed settings: Hi/Mid/Low
setting
Models with 2 air flow speed settings: Hi/Low
Fan speed setting (including Auto) varies depending on the
model.
Air flow direction angles (4-angle, or 5-angle Swing) Auto
Air flow
Louver ON/OFF
direction
setting
Air flow direction settings vary depending on the model.
ON/OFF/Temperature setting can be done up to 8 times one
Weekly
day in the week.
scheduler
The time can be set by the minute.
Individually prohibit operation of each local remote control
function (ON/OFF, Change operation mode, Set
temperature, Reset filter).
Permit / Prohibit
1: When the local remote controller inactivation command
local operation
is received from the main system controller,
"
" is displayed.
By the setting from System Controller, the operation for the
following modes is prohibited.
At cooling prohibited
At heating prohibited
At cooling-heating prohibited : Cool, Heat, Dry, Auto
Measures the intake temperature of the indoor unit when
the indoor unit is operating.
When an error is currently occurring on an air conditioner
Error
unit, the afflicted unit and the error code are displayed.
Test run
This operates air conditioner units in test run mode.
Up to 16 indoor units can be connected to an interlocked
system that has one LOSSNAY. LOSSNAY items that can
Ventilation
be set are "Hi" "Low" "Stop". Ventilation mode switching is
equipment
not available.
Function to limit
Set temperature range limit to cooling, heating, or auto
the setting range
mode.
of room
temperature
(Set temperature
range limit)
Easy-to-operate
Setting/releasing of simplified locking for remote control
simplified locking
switch can be performed.
function
· Locking of all switches
(Auto lock function)
· Locking of all switches except ON/OFF switch
(Side view)
19
[
]
3
/
4
:Each unit
:Each group
:Each floor
:Collective
Description
Operations Display
: Cool, Dry, Auto,
: Heat, Auto,
Unit:mm[in.]
(Rear view)
13
46
[1-
/
]
16
C7-R Rev.
:Each block
:Not available
1
3 - 5
Advertisement
Chapters
Table of Contents
