Using The Remote Controller (Par-W31Maa) - Mitsubishi Electric e Series Service Handbook

[ IV Remote Controller ]
IV Remote Controller

[1] Using the Remote Controller (PAR-W31MAA)

<1> Power ON/OFF
During operation
During stoppage
<2> Operation mode and set temperature settings
Operation mode setting
Button operation
Unit1
F1 F2
Set temperature setting
Button operation
Unit1
F1 F2
HWE20010
Unit1 FRI
Press the [ON/OFF] button.
Next
The ON/OFF lamp will light up in green, and the operation will start.
Unit1 FRI
Pressing the [ON/OFF] button brings up a confirmation screen. When it appears,
press the [F3] button.
Next
The ON/OFF lamp will come off, and the operation will stop.
Press the [F1] button to go through the operation modes in the order of "Heating,
FRI
Anti-Freeze, Cooling and Heating-ECO."
Select the desired operation mode.
Next
F3 F4
Press the [F2] button to decrease the set temperature, and press the [F3] button
FRI
to increase.
Next
F3 F4
Heating Anti-Freeze
Cooling Heating-ECO
- 65 -
GB