Table of Contents
Advertisement
10
|
Configuration
Installer reference guide
228
D
User profile
Operation
Wireless gateway
Malfunctioning
Room
About the WLAN cartridge or WLAN module
The WLAN cartridge or WLAN module (only one of the two needed) connects the
system to the internet. The user can then control the system via the ONECTA app.
This needs the following components in case of WLAN cartridge:
a
This needs the following components in case of WLAN module:
a
a
WLAN cartridge
WLAN module
b
Router
c
Smartphone + app
Configuration
To configure the ONECTA app, follow the in-app instructions. While doing this, the
following actions and information are needed on the user interface:
[D] Wireless gateway
[D.1] Mode
[D.2] Reboot
[D.3] WPS
[D.4] Remove from cloud
[D.5] Home network connection
[D.6] Cloud connection
b
c
b
c
The WLAN cartridge needs to be inserted in the
user interface. See the installation manual of the
WLAN cartridge.
The WLAN module needs to be installed by the
installer on the indoor unit (on the inside of the
front panel). See:
▪
Installation manual of the WLAN module
▪
Addendum book for optional equipment
Field supply.
The ONECTA app needs to be installed on the
user's smartphone. See:
http://www.onlinecontroller.daikineurope.com/
EPRA14~18D + ETBH/X16E
Daikin Altherma 3 H HT W
4P644736-1D – 2023.10
Advertisement
Table of Contents
