User Settings - Daikin ETBH16E9W Installer's Reference Manual

10.5.7 User settings

Language
Time/date
Holiday
EPRA14~18D + ETBH/X16E
Daikin Altherma 3 H HT W
4P644736-1D – 2023.10
INFORMATION
The maximum heat pump temperature depends on the ambient temperature. For
more information, see the operation range.
WD curve type
There are 2 methods to define the weather-dependent curves:
▪ 2-points (see "10.4.2 2-points
▪ Slope-Offset (see
In [2.E] WD curve type, you can choose which method you want to use.
In [5.E] WD curve type, the chosen method is shown read-only (same value as in
[2.E]).
# Code
[2.E] / [5.E] N/A
Overview
The following items are listed in the submenu:
7
Space heating/cooling
Tank

User settings

Information
Installer settings
# Code
[7.1] N/A
# Code
[7.2] N/A
INFORMATION
By default, daylight savings time is enabled and clock format is set to 24 hours. If you
want to change these settings, you can do this in the menu structure (User
settings > Time/date) once the unit is initialised.
About holiday mode
During your holiday, you can use the holiday mode to deviate from your normal
schedules without having to change them. While holiday mode is active, space
heating/cooling operation and domestic hot water operation will be turned off.
Room frost protection and disinfection operation will remain active.
curve" [ 4 152])
"10.4.3 Slope-offset curve" [
▪ 0: 2-points
▪ 1: Slope-Offset
[7] User settings
[7.1] Language
[7.2] Time/date
[7.3] Holiday
[7.4] Quiet
[7.5] Electricity price
[7.6] Gas price
Language
Set the local time and date
10 Configuration
|
4
153])
Description
Description
Description
Installer reference guide
193