Daikin ETBH16E9W Installer's Reference Manual page 199

Configuration wizard
Domestic hot water
EPRA14~18D + ETBH/X16E
Daikin Altherma 3 H HT W
4P644736-1D – 2023.10
9
User settings
Information
Installer settings
Commissioning
User profile
After first power ON of the system, the user interface will guide you using the
configuration wizard. This way you can set the most important initial settings. This
way the unit will be able to run properly. Afterwards, more detailed settings can be
done via the menu structure if required.
To restart the configuration wizard, go to Installer
Configuration wizard [9.1].
This part only applies to systems with an optional domestic hot water tank
installed.
Domestic hot water
The following setting determines if the system can prepare domestic hot water or
not, and which tank is used. Set this setting according to the actual installation.
[9] Installer settings
[9.1] Configuration wizard
[9.2] Domestic hot water
[9.3] Backup heater
[9.4] Booster heater
[9.5] Emergency
[9.6] Balancing
[9.7] Water pipe freeze prevention
[9.8] Benefit kWh power supply
[9.9] Power consumption control
[9.A] Energy metering
[9.B] Sensors
[9.C] Bivalent
[9.D] Alarm output
[9.E] Auto restart
[9.F] Power saving function
[9.G] Disable protections
[9.H] Forced defrost
[9.I] Overview field settings
[9.N] Export MMI settings
[9.P] Bizone kit
10 Configuration
|
settings >
Installer reference guide
199