Canon NP-1015 Service Manual page 56

II. DRIVE SYSTEM
I
A. SCANNER DRIVE UNIT
Figure 4-l 0
1. Removing the Scanner Drive Cable
1) Make a mark on the tension pulley
spindle plate with a scribe, then loosen
screws B (two) securing the plate.
2) Slacken off screw A enough to remove
the scanner drive cable.
2. Installing the Scanner Drive Cable
1) String the scanner drive cable in the
order shown in Figure 4-l 0.
2) Using screw A, move the spindle plate
to the position of the scribed line.
3) Tighten screws B.
4-4
COPYRI6tlT 0 1966 CANON INC. CANON NP4015/1215S REV.0 OCT. I980 PAINTED IN JAPAN IlMPtllMf AU JAPONl