Table of Contents
Advertisement
I.
EXTERNALS
A. COVERS,
PANELS,
AND
DOORS
Figure 4-1
@ Copyboard cover
@ Front door
@ Left cover
7
Cassette
8
@ ,'EE;r dehvery
8
Right cover
@ Copyboard glass
$
ipper
rear 'Over
10
ear cover
@ Control panel
Figure 4-2
For cleaning,
inspecting,
or repairing
inside the copier, remove covers and panels
using the following
procedure.
No description is given of the procedure for
removing covers that can be removed by
simply
unscrewing
the screws,
securing
them.
Note:
Before removing the copyboard
glass, be
sure that the copier is closed. If it is neces-
sary to use solvent to clean the copyboard
glass, use alcohol. Do not use MEK, because
it
may
dissolve the white paint along the left
edge of the glass.
1) Unscrew
the two screws holding the
front door strap, and open the front
door fully.
2) Unscrew the screw, then remove the
knob.
3) Unscrew
the screw, then remove the
magnet catch.
4) Unscrew the six screws, then remove
the inner cover.
0
Mounting screws @ Mounting screws
@ Knob
@ Magnet catch
@ Inner cover
Figure 4-3
COPYAlGHT
0
I988 CANON INC.
CANOll
HP-1015/1215S
REV.0 OCT. 1988 PAINlEO
Ill JAPAN IlMPAlMf
AU JAPOWI
4-l
Advertisement
Table of Contents
