Canon NP-1015 Service Manual page 73

~ 3. Removing the Upper Fixing Roller,
5) Unscrew the two screws, and remove
I
Heater, and Lower Fixing Roller.
the thermistor cover plate.
,fl'\
\
1) Remove the fixing unit from the copier
2) Remove the Faston and unscrew the
screw to free the heater plate (front).
@ Faston @ Heater mounting
--my,, @ Screw plate (front)
I Figure 4-66
3) Remove the Faston, then unscrew the
screw.
4) Slowly remove the heater mounting
plate (rear) and the heater.
@) Screws
@ Thermistor cover
plate
Figure 4-70
6) Unscrew the screw, and remove the
thermistor.
7) Unscrew the screw, and remove the
thermoswitch.
@ Faston
@ Screws
@
Heater mounting
plate (rear)
@ Heater
Figure 4-69
,I--\.
I"
0
Screw
@ Thermistor
@ Themoswitch
Figure 4-71
8) Remove the C-ring at the rear, then
remove the gear.
0 C-ring @ Gear
Figure 4-72
COPVAlCHT 0 IQ08 CANON INC. CANON NP4015/1215S RN.0 OCT. IQ80 PAINTEO IN JAPAN IlMPAlMf AU JAPON)
4-21