Canon NP-1015 Service Manual page 70

5) Spread newspapers on the floor, then
open the toner in the developing unit.
6) Unscrew the screws and remove the
mounting blade with blade. (see Figure
4-54).
7) Unscrew the two screws and remove
the handle.
9) Remove the two E-rings, then remove
the two gears.
OS
crews @ Handle
Figure 4-55
8) Unscrew the four screws, then remove
the developing cylinder holder (front),
ball bearing, and developing cylinder.
@ E-rings
@I Gears
Figure 4-57
10) Unscrew the two screws, then remove
the developing cylinder holder (rear),
,_..
the ball bearing, and the developing
cylinder.
@ Developing cylin-@ kyloping cylin-
der holder (rear) ,,--\
@ Ball bearing
@I Screws
@ Ball bearing
@ Screws
Figure 4-56
Figure 4-58
11) demove the developing cylinder and
side seals.
4- 18
COPYAI6HT 0 1988 CANON INC.
CANON HP-1015/1215S RN.0 OCT. 1988 PRINTED IN JAPAN IlMPAlMf AU JAPOH)