Canon NP-1015 Service Manual page 61

6) Pull out the registration roller clutch
(See Figure 4-26). then remove the
spacer.
0 Spacer
@ E-ring
Figure 4-27
7) Remove the two E-rings, tension spring,
and two spacers, then remove the regis-
tration rollers.
@ E-ring
@ Spacers
@ Tension spring
Figure 428
4. Removing the Feed Roller and Prere-
gistration Roller
1) Remove the U guide
2) Remove the two E-rings, remove the
gear of the feed roller and the Pre
registration roller.
3) Remove the two E-rings, then remove
the bearings of the feed roller and the
manual feed pick-up roller.
@ Manual feed pick-0 E-ring
up roller bearing
@ Feed roller
bearing
Figure 4-29
4) Open the manual feed unit and remove
the feed roller and manual feed pick-up
roller
@ Feed roller
@ Manual feed
pick-up roller
Figure 4-30
COPYRIGHT 0 1988 CANON INC.
CANON NP401511215S AN.0 OCT. 1980 PAIHTECI IN JAwlN IIMPAIMf AU JAPONI
4-9