Mounting Requirements; Floor Loading And Recommended Mounting Methods - GE Innova 2100-IQ Preinstallation Manual

Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ Cardiovascular Imaging System Pre-Installation Manual
GE Healthcare

2 Mounting Requirements

2.1 Floor Loading and Recommended Mounting Methods

See Table 5-2. To obtain floor loading and recommended mounting methods for components not
specified in Table
2, Basic Innova LC System
Table 5-2:
PRODUCT OR
COMPONENT
Liberty LC Position‐
er
Table
IMPORTANT NOTICE
The Table baseplate or the System baseplate are mandatory to install the table (patient support). The Table must never be installed
on grade.
C2 Cabinet
C1 Cabinet
COOLIX 4000
Detector Chiller
Thermo-Tek
Detector Chiller
Thermo-Con
Fluoro UPS UL (op‐
tional)
Fluoro UPS CE (op‐
tional)
Fluoro UPS IF box
(optional)
PDB US (4)
PDB CE (4)
Chapter 5 Physical Characteristics
5-2, refer to the appropriate component Pre-Installation Manual listed in
Compatibility.
DIMENSIONS MM (INCHES)
NET WEIGHT
KG (LBS)
WIDTH
750 (1655) See Illustrations
TIONER DIMENSIONS :
• Side view
• Top view
•
Front view
in Dimension Drawings
590 (1300) See See illustrations in
note 1
• Omega IV
• Omega V
785 (1731) Innova IQ
See Illustration
299 (659)
sions in
See Illustration
506 (1115.5)
sions in
204 (450) See 556 (21.9)
note 3 See note 2/3
See Illustration
mo–Tek Dimensions in
13.6 (30)
See Illustration
mo–Con Dimensions in
14.6 ( 32.2)
530 (1169) 690 (27.0)
480 (1059) 680 (26.7)
4 (9) 280 (11.02) 314 (12.36) 124.5 (4.9)
148 (326) 685 (27)
110 (242) 800
LOAD BEAR‐
DEPTH HEIGHT
MM (INCHES)
INNOVA LC POSI‐
Circle diame‐
ter 600 (23.62)
Dimension Drawings 571.5x429
(22.5x16.9)
750x600
(30x24)
C2 Cabinet Dimen‐
Dimension Drawings (23.63x35.44)
C1 Cabinet Dimen‐
Dimension Drawings (23.63x35.44)
830 (32.7) 1090 (43)
Four casters Not applicable
See note 3 See note 3
Detector Chiller Ther‐
Dimension
(11.14x13.82)
Drawings
Detector Chiller Ther‐
Dimension
Drawings
800 (31.5) 1820 (70.1)
800 (31.5) 1450 (57.1)
225 (9) 1850 (73)
300 1200
Direction 5160944-13-1EN, Revision 2
WEIGHT/ OC‐
ING AREA CUPIED
AREA
2410 kg/m 2
(492.3 lb/ft 2 )
2000 kg/m 2
(409 lb/ft 2
478 kg/m 2 (98
600x900
lb/ft 2 )
838 kg/m 2
600x900
(172 lb/ft 2 )
283x351
13.5x11.14
(344x283)
975 kg/m 2
(200 lb/ft 2 )
883 kg/m 2
(181 lb/ft 2 )
Chapter
MOUNTING METHOD
Recommended:
•
Through-Bolts
(12)
Alternates:
• On Grade 5/8 in,
Anchors (12)
• Above Grade 3/4
in. Anchors (12)
See Illustration 5-28,Il‐
lustration 5-29 and Illus‐
tration 5-30
Same as Innova LC Po‐
sitioner See IMPOR‐
TANT NOTICE below.
Ground -mounted
Ground -mounted
Wall-mounted
Wall-mounted
Wall-mounted
139