Table of Contents
Advertisement
The PowerEdge R360 system is a 1U server that supports:
● One Intel Xeon E-2400 series processor with up to with up to eight cores or One Intel Pentium processor with two cores
● Four DIMM slots
● Two redundant AC or DC power supply units
● Up to 8 x 2.5 inch SAS/SATA (HDD/SSD) drives or Up to 4 x 3.5 inch SAS/SATA (HDD/SSD) drives or Up to 4 x 2.5 inch
SAS/SATA (HDD/SSD) drives with 3.5 inch to 2.5-inch adapter in 3.5-inch carrier.
NOTE:
All instances of SAS, SATA drives are referred to as drives in this document, unless specified otherwise.
CAUTION:
Do not install GPUs, network cards, or other PCIe devices on your system that are not validated
and tested by Dell. Damage caused by unauthorized and invalidated hardware installation will null and void the
system warranty.
Topics:
•
Front view of the system
•
Rear view of the system
•
Inside the system
•
Locating the Express Service Code and Service Tag
•
System information labels
•
Rail sizing and rack compatibility matrix
Front view of the system
Figure 1. Front view of 4 x 3.5-inch drive system
Table 1. Features are available on the front of the system for a 3.5-inch drive system
Item
1
2
8
PowerEdge R360 system overview
PowerEdge R360 system overview
Ports, panels, and slots
Left control panel
3.5-inch drive or 2.5-inch
drive in 3.5-inch carrier
adapter.
Icon
N/A
NA
2
Description
Contains the system health,
system ID, and the status LED
indicator.
Enables you to install drives
that are supported on your
system.
NOTE:
For drive slot
numbers, see the
system
information label
section.
.
Advertisement
Table of Contents
