Dell PowerEdge R360 Installation And Service Manual page 89

Figure 58. Installing the BOSS N1 card
3. Ailing the BOSS N1 cage with the unlock sign and slide back into the bay till it locks firmly in place.
4. Tighten the screw to secure the BOSS N1 cage to the chassis.
5. Connect the cables to the BOSS N1 module.
Figure 59. Installing the BOSS N1 cage
6. Slide the BOSS N1 M.2 carrier in to the slot.
7. Close the latch to secure the BOSS N1 M.2 carrier .
Installing and removing system components 89