Connecting Via A Wired Lan; Connecting The Lan Cable - Oki COREFIDO B822dn User Manual

Connecting via a wired LAN

Connect this machine and a PC with a LAN cable to print. Connect the LAN cable, and set the IP address and
others on the operator panel.

1. Connecting the LAN cable

1
Prepare a LAN cable (category 5e or better, twisted pair, straight) and a hub.
2
Power off this machine.
If you are using the optional Wired LAN module, please refer to
3
Plug one end of the LAN cable into the network interface connector (LAN1) of this machine.
Plug it into the connector (LAN2) when you are connecting to the Wired LAN module.
4
Plug the other end of LAN cable into the hub.
Then, set the network information like the IP address on this machine.
2. Setting the IP address, etc.(P.47)
Preparing and connecting this machine to your PC
"Installing the Wired LAN
- 46 -
module(P.29)".