Error Message List - Oki COREFIDO B822dn User Manual

Error Message List

Clear the error by referring to the description of the corresponding message.
Meanings of symbols used in the error message are as follows.
 Tray Name: One of the following: Tray 1, Tray 2, Tray 3, Tray 4 and MP Tray
 Cover Name: The front cover or the output tray (top cover), or the rear cover
 Code: The error code number of 1 to 3 digits. The displayed number changes with the specific error.
 Pages: Number of pages to print
 Media Size: The size of paper
 Media Type: The type of paper
 Number: Number of all places where paper jams have occurred
For "---", different messages are displayed depending on the state of this machine.
When "Please see HELP for details" is displayed at the bottom of the display, if you press «HELP» on the
operator panel, the error code and solution will be displayed.
Message
Storage Error: 250
To Storage
format, press [OK]
To shut down, press [Cancel]
Detected an abnormality of internal
database
The data must be deleted
After pressing [OK], the data will be
deleted, and then reboot
---
PU Flash Error
Communication Error
Please Wait
Executing Maintenance
Please do not Power Off
---
Toner Low. Search Keyword:
P10081
---
The optimal toner cartridge for this
printer is not installed
---
Image Drum Near Life. Search
keyword: P10076
Install New Image Drum
Image Drum Life.
Press Help for details
Install New Image Drum
Image Drum Life.
Press Help for details
Error code
- While the machine is being initialized, storage to be formatted is
detected.
If «OK» is pressed, the machine will be restarted and restored
after the storage is formatted.
- An error is detected in the built-in database.
Press the «OK» button to delete the database and restart this
machine.
- Firmware update has failed.
Please update the firmware again.
If the error still persists, contact our Customer Service Center or
your dealer.
- An error has occurred in this machine. Restart this machine.
If the error still persists, contact our Customer Service Center or
your dealer.
- Firmware update is in progress.
If the power is turned off halfway, this machine may not be able
to start.
When update is completed, the machine restarts automatically.
- The toner is low. Please prepare a new toner cartridge.
After the message of replacement is displayed, please replace
it with a new one.
- The toner cartridge is not optimal for this machine.
It is recommended to use the toner cartridge that is optimal for
this machine.
- The image drum is approaching its service life.
Please prepare a new image drum.
After the message of replacement is displayed, please replace
it with a new one.
353 Install New Image Drum.
Please prepare a new image drum. To replace the image drum,
refer to
image drum and the toner
563 Install New Image Drum.
Please prepare a new image drum. To replace the image drum,
refer to
cartridge(P.320)".
- 368 -
Description
"Replacing the image drum(P.315)" or
cartridge(P.320)".
"Replacing the image drum and the toner
Troubleshooting
"Replacing the