Connecting Cables; Connecting Using Lan Cables - Oki C942 User Manual

Connecting Cables

Connect the device to a PC or network.
The device is equipped with the LAN (network)
interface connectors and USB interface
connectors as standard. Connections can be
made to the network directly using LAN cables,
and to the PC using USB cables.

Connecting Using LAN Cables

Connecting the device to a network such as
LAN (Ethernet*), etc., enables the device to
be shared by all the PCs on the network. This
system can be used by OS such as Windows or
Mac, etc.
*: The device is equipped with network interfaces compatible
with 10BASE-T/100BASE -TX/1000BASE-T as standard.
Windows Macintosh
Windows
Macintosh
„ Preparations
LAN cable
Note
⿟ LAN cables and hubs are not enclosed with the device.
Prepare LAN cables (category 5 or greater, twist pair
cable, straight) and hubs as necessary.
⿟ The setup must be changes if using with 1000BASE-T
as the factory default settings are "Gigabit network:
Disabled" in the administrator setup menu.
Setup method: In the control panel, select [Admin
Setup]> Enter the password> [Network Setup]> [Gigabit
network]> [Enable].
Hub
Hub
„ Connecting LAN Cables
1
Connect the LAN cable to the LAN
(network) interface connector (
Connect the other end of the LAN cable
to the hub connector (
- 57 -
Connecting the PC
).
).
LAN cable LAN (network)
interface
Connector
1
2
3
4