This section describes the procedure for installing the Wireless LAN module and enabling the Wireless LAN
module on the operator panel.
You can also use standard wired LAN and wireless LAN on different networks at the same time.
1
Turn off the power supply of this machine, and disconnect the power cord.
If you install it with the power supply turned on, the main unit or Wireless LAN module may be damaged.
Turning the power
2
Open the Wireless LAN module cover on the side of this machine.
3
Pull out the connector and insert it into the Wireless LAN module.
4
Insert the Wireless LAN module along the guide with the label facing the outside, and push it
toward the main unit to fix.
Model: WL-D1
off(P.81)
Preparing and connecting this machine to your PC
- 28 -