Oki COREFIDO B822dn User Manual page 223

Setting with EAP-TLS
This section describes how to set up EAP-TLS, one of the IEEE802.1X authentication.
1
Open the web page of this machine.
Opening the web
2
Log in as an administrator.
Logging in as an
3
Select [Network Setup].
4
Click the Menu button on the upper right corner, and then select [Security] - [IEEE802.1X
Authentication].
5
Select [Enable] in [IEEE802.1X Authentication].
6
Select [EAP-TLS] in [EAP Type].
7
Input the user name in [EAP User].
8
Select [Not use] in [Use server certificate (SSL/TLS certificate) in EAP authentication].
9
Input the password in [Import of Client Certificate].
10
Click [Import of Client Certificate], select the certificate file, and click [OPEN].
Only PKCS#12 files can be imported.
11
Select [Authenticate Server] in [Server Authentication Settings], and then click [Import] in [Import
of CA Certificate].
12
Select the CA certificate file, and click [OPEN].
Specify the CA certificate used for RADIUS server authentication. PEM, DER and PKCS#7 files can be
imported.
13
Click [Apply].
14
When the machine is online, power off the machine.
15
Remove the LAN cable from the machine.
16
Connect the LAN cable to the network interface connector of this machine.
17
Connect the other end of the LAN cable to the authentication port of the authentication switch.
18
Power on this machine.
19
Set the IP address of this machine.
Setting with PEAP
This section describes how to set up PEAP, one of the IEEE802.1X authentication.
1
Open the web page of this machine.
Opening the web
2
Log in as an administrator.
Logging in as an
3
Select [Network Setup].
4
Click the Menu button on the upper right corner, and then select [Security] - [IEEE802.1X
Authentication].
page(P.213)
administrator(P.214)
page(P.213)
administrator(P.214)
- 223 -
Management of this machine